• Gateway Kerlink iFemtocell not connect to ip 10.152.12.10 /10.152.22.10

    The gateway does not connect to ip 10.152.12.10/10.152.22.10. if you set ip "lrc-dev.thingpark.com" in the Backhaul settings, the gateway connects, but the parameters from the server are not set (frequencies, turning on the radio module) https://doc
  • Dragino LG02 + Abeeway micro tracker V3 + AWS

    Hi, I have Dragino LP02 and Abeeway micro tracker V3, i'd like to send the data to AWS. Someone can help me? Best regards
  • TTGO T-Beam connecrt to Ufispace

    Can I  use TTGO (NodeMCU Device) connect to Ufispace (Gateway)? I try to use TTGO (NodeMCU) connect to Ufispace(Gateway). Has anyone use to connect to Ufispace, Do you have code to share?
  • ADR in community

    Hi, I have a question about the calculation of ADR. I observed that with good radio conditions the SF changes at the 6th uplink. My device is powered at night so does not talk during the day. When the device restarts the device keeps the LoraWan session
  • Mac Hex Decoder

    Hello, We would like to be able to decode the Max Hex Message through our Mqtt broker. Where can I find the documentation to do it ? Thanks in advance,
  • Is it possible to configure an alert for silent devices ?

    Hi, I would like to know if in community it's possible to configure an alert for devices without uplinks from hours or days ? Thanks in advance,
  • Difference between thingpark wireless portal and thingpark community edition

    Hi,  What is the difference between thingpark wirless portal and the latest thingpark community editions?  Earlier thingpark wireless doesn't support authorization header while Configuring the routing profiles now we could see there is custom header option.
  • Cisco IXM stuck after reboot

    Hi! I have a Cisco IXM gateway. I tried to install your LRR but after reboot, my gateway seems stuck and I can't do anything with it anymore. It shows the prompt "Marvell>>" when I console into it. How can this be fixed?
  • Sending downlink to the device

    Hi, I'm able to send an uplink from the loradevice to the connection that is created on the actility platform. I would like to send a downlink to the device.   Is this the right API to use to send downlinks ? "https://dx-api.thingpark.com/core/v145/api/devices/<deviceID>/downlinkMessages"
  • Cannot delete Gateway

    Since last update i am trying to delete a Gateway and that's not possible.  I get this Error An unexpected error occurred while trying to handle your request. Please retry the request and contact your administrator if this problem persists. Error details:
  • packet-forwarder firmware validation failed on Cisco IXM

    I've installed pubkey but cannot install packet forwarder I get error packet-forwarder firmware validation failed
  • Abeeway LoRaWAN tracker leaving a network and then coming back... what Join behavior to expect?

    What happens when an Abeeway tracker gets out-of-range of a LoRaWAN network for a long time (or the network fails for an extended time) ? How does the tracker find-out that it has become isolated, and how does it attempt to reconnect ?
  • Why do I see sometimes very late packets in Wireless Logger ?

    Sometimes uplink packets from devices appear in wireless logger with timestamps that are way in the past, few hours or even days. How to explain this behavior ?
  • ThingPark compatible gateways

    Where can I find ThingPark compatible gateways?
  • Application server with MQTT(TLS1.2) support

    My application server communicates with Actility sever. My application uses MQTT(TLS1.2) protocol. Can Actility server support MQTT(TLS1.2) protocol? And How Can My application connect and communicate with Actility server?
  • Announcements

  • Azure IoT Bug notice (11/2022) : Please read if you are suddenly unable to connect to Microsoft Azure IoT Hub.

    Overview Symptom: Your connection to IoT Hub is « CLOSED » and a restart doesn’t change anything There is a rolling upgrade of Azure IoT Hub services from 'v1' to 'v2', unfortunately it introduces a regression during authentication for which there is
  • Most Discussed Topics

  • Connecting Kerlink gateway to ThingPark Community

    Hello, Hello, I am preparing to connect a Kerlink Wirnet iFemtoCell-Evolution gateway to the ThingPark All-in-one platform using the TAO (ThingPark All-in-One) installation process, through the Thingpark Community area. I would like to request access
  • Interop EU863-870, test 3.2.1 failed ( ADR on unconfirmed uplink)

    Hello All, Using interop tool for AN EU863-870 device, I have a problem to run successfuly the 3.2.1 test. 1. my device is as below: 2. For the test 3.2.1, seems to test LoRaWAN "data rate backoff" 3. From "Table 9" above picture(from LoRaWAN® L2 1.0.4
  • Interop EU863-870, test 4.2.1.1 failed (RxParamsSetupReq)

    Hello All, Using interop tool for AN EU863-870 device, I have a problem to run successfuly the 4.2.1 test. RxParamsSetup seems ok( RX1_DR_OFFSET = 0; RX2_DR = 2; RX2_FREQ = 868.5) DevStatusReq on RX1 seems ok But the test fails on DevStatusReq sent on