Getting LLR Image for Kerlink
Hi, Based on this article, I'll need to contact ThingPark Support for an image for my kerlink device. Retrieving the base station image | ThingPark Enterprise documentation Any idea how I can do so? the model i'm using is iFemtoCell-evolution Cheers
Converting semtech iot sx1301 starter kit from TTN to Actility
Hi We have an IOT Starter Kit which has been configured for TTN and would like to convert the same to Actility. A documentation on converting the same would be very helpful Thanks and Regards Rajavelu
Gateway connection
Hello everyone, can I register the Gateway with more than on LNS, my gateway working fine with TTN, but can't connect to ThingPark uplink status : never
Revert Browan Micro LoRaWAN Gateway to original (Browan) configuration
Can you please help me to revert my Browan Micro GW to its original configuration - I bought it from the ThingPark Store and it came configured for ThingPark Community, but I would like to use it with my own backend instead. Thank you in advance
Station offline problem
The gateway uses the basic station to connect to the TPE and there is a problem of random offline, Could it be a network problem? Sometimes for more than 20 minutes, Sometimes 3-4 minutes, Any suggestions for unstable connections? But the gateway connected
GW Kerlink Ifemtocell - LRR - Activate web portal
Hello, We have a wirnet ifemtocell evolution connected to Thingpark with the proper LRR image installed. We would like to activate the availability of the portal web as it is possible with the original firmware keros. Please, can yuo help us with th instructions
Configuration Issue - Browan Micro Outdoor Gateway
Hello, Recently I acquired a pre-configured Browan Micro Outdoor Gateway. I connected it with my local network at home via ethernet cable but I cannot access it via SSH neither by AP. Can I get some support? Do I need to install any image on it?
Kerlink IFemtocell connected but Connection "Radio Error" and LoRaWAN Radio Status stop all the time
Hello, I flashed the image and the gateway Kerlink Ifemtoncell is connected now with Thingpark but the connections shows like "Radio Error" and LoRaWAN Radio Status stop all the time. I activate the radio but it goes stop some minutes then Also I tried
Password for the tool Suplog of the Base Station Binary
Hello, I just had a problem and I'm contacting you to ask for your help. When I started to configure my GW, on my free community server, I saw at some point that I had to have credentials to connect to a tool called "SUPLOG". But, I'm not an Actility
GW Milesight UG67 - No image available to install
Hello, I am trying to download the image for the GW Milesight UG67 but is not possible to select in the list. Please let me know if there is a link where is possible to download the image and the steps to install. Thanks.
RAK WisGate Edge Pro RAK7289CV2
Can you give me the basic configuration parameters for this Gateway on Actility? LRR-UUID, where to find it? Also the parameters on the Gateway side, please.
Failed to retry TCURI from CUPS and Router rejected or retry limit reached
Hello, We pursued the official documentation [Implementation Steps - Easy LoRa Basics™ Station setup for Actility TPCP - ThingPark Community] to register the SX1307 IOT Starter Kit on Actility Console. However, after following all steps as per the documentation,
Gateway Kerlink - SSH - SUPLOG - Support Acoount Pass?
Hello, I have installed the image in my Kerlink Wirnet ifemtocell and it is Ok, verifying. Now I have to use the SUPLOG to obtain the LRR-UUID but following the instructions is necessary to connect with Support account by ssh and I don't know the password.
SSH login details - Regarding
Hello Everyone. Gateway: Ufispace Gateway Picocell V1.5 (THINGPARK READY) https://market.thingpark.com/ufispace-enteprise-pico-cell.html I would like to know the login user id and password for root/admin SSH access. Also how to get the LRR UUID and
Gemtek/Browan WAPS-232N IOT Access Point
I have an IOT Access Point with opdk-3.00.27. I want to enable it on the ThingPark Enterprise of Actility, since I have already some sensors and one gateway there. I cannot establish a working connection with the gateway. Any ideas?
unable to Connect Kerlink Istation Gateway to thingpark community throught (cellular network)
i have a kerlink istation gateway which is already integrated to the Thingpark community throught the ethernet interface but when i try to connect using SIM card (cellular network) its not working although all required parameters are there .
Connection error to Actility Thingpark Community via Basic Station
Hi, I have a Tektelic Kona Micro GW that I am trying to Actility Thingpark Community via Basic Station installed on the GW. It was working properly but now I see the following error: Aug 18 00:04:10 kona-micro tek_bstn[20379]: [DEBUG ] bridge_bstn_cups.c:1012
Which gateways are supported on the Community portal?
Hi, where can I find the list of supported gateways for https://community.thingpark.org/ ?
LRR-UUID for Laird Sentrius RG1xx gateway.
Hello, I am new to the Actility network and I am trying to create a test application. I can't seem to find the LRR-UUID for my Laird gateway however. The only thing I have and have used on different platforms is the Gateway EUI. Has anyone else used
P-NUCLEO-LRWAN3 firmware
I use P-NUCLEO-LRWAN3. It includes NUCLEO-F746ZG and LRWAN_GS . I couldn't find firmware of it. How can i reach firmware and C codes ??
What URL for creating new connection should I use?
Hello, I am a bit confused about the URL required while creating a new connection. In the tutorial this https://abeeway-dev1.thingpark.com:50540 is being used as the sensor is an abeeway one. What URL should I use for a generic device? Isn't there a
Milesight GW / Solution Bundles
Hello Community, FYI we are adding Milesight GW into ThingPark portfolio and will build up industrial solution bundles with their products very soon. All will be available under the community program. Thanks! Shmuel
Converting an Enterprise Saas Pre-Configured Gateway into a Community Gateway
Hi, We have a GEMTEK MICRO 8CH V1.5 3G/4G OUTDOOR GATEWAY which is pre-configured for Enterprise Saas (EU). We want to change the configuration for community server. How can we do this? Can anyone advise the proper way? Thanks in advance,
Advantech wise-6610 base station
I'm trying to connect the Advantech wise-6610 with the actility community platform. But when I try to download the Advantech wise-6610 Base station it states that the resource is currently unavailable. When will this be available?
Minihub not connecting to ThingPark
Hi, we have bought from you a Gemtek/Browan Minihub gateway https://market.thingpark.com/gemtek-minihub-v1-5-wifi-indoor-lorawan-gateway.html Following your indications, it has been connected to a wifi network https://docs.thingpark.com/thingpark-enterprise/7.1/Content/BS-installation-guides/Configure-WiFi-connectivity.htm
Base Station connection error
Hi, our base station Kerlink Wirnet iStation 868 suddenly stopped sending data to Actility platform from friday 29/04/2022 night. The following actions have been performed: -switch off/on the device - no changes -device reset (kerosd -s and reboot), upgrade
Basics Station connection problem
Hi, my Basiscs Station GW (Rasp3 + IC880A) had been working without any issue. But suddenly connection with TPE server had been interrupted and could not connect again. 2022-03-09 22:12:53.975 [CUP:VERB] Retrieving update-info from CUPS https://community.thingpark.io:443...
How do connect other gateways to ThingParkEnterprise?
I'm trying to connect to ThingParkEnterprise using the Dragino LPS8 gateway, I can't find any URIs for base station connections, I think Dragino LPS8 gateway can't connect to it? Can you help me?
Remove Thingpark LRR from a Tektelic Gateway - Revert basestation to factory configuration
We have a Tektelic Kona Micro gateway https://tektelic.com/catalog/kona-micro-lorawan-gateway. I was able to install Thingpark LRR package on it following this instruction https://docs.thingpark.com/thingpark-wireless/7.1/Content/BS-installation-guides/Tektelic-base-stations.htm.
Gateway Kerlink iFemtocell not connect to ip 10.152.12.10 /10.152.22.10
The gateway does not connect to ip 10.152.12.10/10.152.22.10. if you set ip "lrc-dev.thingpark.com" in the Backhaul settings, the gateway connects, but the parameters from the server are not set (frequencies, turning on the radio module) https://doc
Dragino LG02 + Abeeway micro tracker V3 + AWS
Hi, I have Dragino LP02 and Abeeway micro tracker V3, i'd like to send the data to AWS. Someone can help me? Best regards
Cisco IXM stuck after reboot
Hi! I have a Cisco IXM gateway. I tried to install your LRR but after reboot, my gateway seems stuck and I can't do anything with it anymore. It shows the prompt "Marvell>>" when I console into it. How can this be fixed?
Cannot delete Gateway
Since last update i am trying to delete a Gateway and that's not possible. I get this Error An unexpected error occurred while trying to handle your request. Please retry the request and contact your administrator if this problem persists. Error details:
packet-forwarder firmware validation failed on Cisco IXM
I've installed pubkey but cannot install packet forwarder I get error packet-forwarder firmware validation failed
ThingPark compatible gateways
Where can I find ThingPark compatible gateways?