LTE connection
good morning I hope you are well I have a question regarding the LTE connection, in the status field it appears that the status is "Not connected", and I don't understand why. In the interfaces field I get the IP address of the sim card that I have in
Radio Error on Conduit
I've been trying to test ThingParkCommunity with my Conduit IP67 BS, but after I got to connect it to TPC it displays a "Radio Error" message, I've read other topics in the forum and I think it may be that ports 21 and 22 are not open on my network. Right
Removing ThingPark LRR
I added a Multitech Conduit gateway to ThingPark by flashing the firmware provided. How do I rollback to the original Multitech firmware? I only have access to SUPLOG
What is client_id and client_secret
ive tried to put in me email and password but it still does not work. May i know what is needed?
Connect Multitech conduit through basics station and cups
Hi, I am connecting a Multitech conduit to thingpark community using Basics station. I have setup the URI, Station config, and get the server cert from "https://www.amazontrust.com/repository/AmazonRootCA1.pem" as in the pic: But the base station in thingpark
Connecting a Cisco IXM with a Thingpark community account
I have a Cisco IXM and I am trying to connect using a Community account. I need to know what the entries are that I need to add using the SUPLOG utility backhaul settings. I am not sure what host name to use.
Base station With Multitech gateway
How can I get the (Server Cert, Gateway Cert and Gateway key)
Basics Station and CUPS, LNS: Certificate problems
I use a Miromico Gateway MiroEdge, where no image is provided. I tried to use the Basics Station Setup, but I fail with the authentification. I have these options to provide the certificates: I created the AmazonRootCA1 on the gateway and put it into
Configuration of Abeeway trackers usin ADM
Hello there. I've an access to ADM but how can i insert devices to it. I do search to find the devices but with no success. Should the devices be registered by the support first? I have a smart Padge and a compact tracker. Thanks
Tektelic Kona Micro Cellular not Applying/comitting
I have a Tektelic Knoa Micro that successfully brings data back over ethernet but not over cellular. I am selecting wwan0 and then confirm. The config lists modified but when I hit apply it says please wait and never changes. Screenshots attached.
SUPLOG password
Could support please send me the SUPLOG password please to my email. I am using the Community version of TPE with Multilink 1.5 AP which I have updated to use the Actility LRR. Thanks in advance.
Kerlink Gateway to Thing Park network
Hi, I need to add the Kerlink wirnet iFemtoCell gateway to the Thingpark network server. Do you have any documentation available for that??
Add Dragino DLOS8N gateway to Thingpark Enterprise
Hi Team, I want to add Dragino DLOS8N gateway to Thingpark Enterprise but on the create gateway page, I don't see any option to choose Dragino. So can I use Generic option to add this kind of Gateway.?
Tektelic Enterprise GW
I have installed the 2.6.79 LRR onto my gateway and the original password Tektelic no longed works, how do I get the new SUPLOG password?
remove my old account ?
Hi, When I tried to login into TPCP, I can't do it because the login page rejected me. I think because I haven't login for about 1 years or more. The forgot password operation didn't work. I don't know why. So, I decided to recreate my account. Then,
Kerlink Wirenet SOP4 SUPLOG password ?
Hello. I am configuring Kerlink Wirenet SOP4. Can't find SUPLOG password. Please tell me what is the password? Image: TP_Enterprise_BS_Image_kerlink.KERL_WIR2.1_any_TPCP_SAAS_2.4.77_v2.0_no-keygen.tar.gz Thanks.
Getting LLR Image for Kerlink
Hi, Based on this article, I'll need to contact ThingPark Support for an image for my kerlink device. Retrieving the base station image | ThingPark Enterprise documentation Any idea how I can do so? the model i'm using is iFemtoCell-evolution Cheers
Converting semtech iot sx1301 starter kit from TTN to Actility
Hi We have an IOT Starter Kit which has been configured for TTN and would like to convert the same to Actility. A documentation on converting the same would be very helpful Thanks and Regards Rajavelu
Gateway connection
Hello everyone, can I register the Gateway with more than on LNS, my gateway working fine with TTN, but can't connect to ThingPark uplink status : never
GW Kerlink Ifemtocell - LRR - Activate web portal
Hello, We have a wirnet ifemtocell evolution connected to Thingpark with the proper LRR image installed. We would like to activate the availability of the portal web as it is possible with the original firmware keros. Please, can yuo help us with th instructions
GW Milesight UG67 - No image available to install
Hello, I am trying to download the image for the GW Milesight UG67 but is not possible to select in the list. Please let me know if there is a link where is possible to download the image and the steps to install. Thanks.
RAK WisGate Edge Pro RAK7289CV2
Can you give me the basic configuration parameters for this Gateway on Actility? LRR-UUID, where to find it? Also the parameters on the Gateway side, please.
Gateway Kerlink - SSH - SUPLOG - Support Acoount Pass?
Hello, I have installed the image in my Kerlink Wirnet ifemtocell and it is Ok, verifying. Now I have to use the SUPLOG to obtain the LRR-UUID but following the instructions is necessary to connect with Support account by ssh and I don't know the password.
SSH login details - Regarding
Hello Everyone. Gateway: Ufispace Gateway Picocell V1.5 (THINGPARK READY) https://market.thingpark.com/ufispace-enteprise-pico-cell.html I would like to know the login user id and password for root/admin SSH access. Also how to get the LRR UUID and
Which gateways are supported on the Community portal?
Hi, where can I find the list of supported gateways for https://community.thingpark.org/ ?
LRR-UUID for Laird Sentrius RG1xx gateway.
Hello, I am new to the Actility network and I am trying to create a test application. I can't seem to find the LRR-UUID for my Laird gateway however. The only thing I have and have used on different platforms is the Gateway EUI. Has anyone else used
P-NUCLEO-LRWAN3 firmware
I use P-NUCLEO-LRWAN3. It includes NUCLEO-F746ZG and LRWAN_GS . I couldn't find firmware of it. How can i reach firmware and C codes ??
What URL for creating new connection should I use?
Hello, I am a bit confused about the URL required while creating a new connection. In the tutorial this https://abeeway-dev1.thingpark.com:50540 is being used as the sensor is an abeeway one. What URL should I use for a generic device? Isn't there a
Converting an Enterprise Saas Pre-Configured Gateway into a Community Gateway
Hi, We have a GEMTEK MICRO 8CH V1.5 3G/4G OUTDOOR GATEWAY which is pre-configured for Enterprise Saas (EU). We want to change the configuration for community server. How can we do this? Can anyone advise the proper way? Thanks in advance,
Remove Thingpark LRR from a Tektelic Gateway - Revert basestation to factory configuration
We have a Tektelic Kona Micro gateway https://tektelic.com/catalog/kona-micro-lorawan-gateway. I was able to install Thingpark LRR package on it following this instruction https://docs.thingpark.com/thingpark-wireless/7.1/Content/BS-installation-guides/Tektelic-base-stations.htm.
Dragino LG02 + Abeeway micro tracker V3 + AWS
Hi, I have Dragino LP02 and Abeeway micro tracker V3, i'd like to send the data to AWS. Someone can help me? Best regards
ThingPark compatible gateways
Where can I find ThingPark compatible gateways?