connection to azure IOT is 'stuck'
I have an Azure IOT connection that has been working for a few months without change. This morning at 3am (10 hours ago) it stopped. Azure is telling me that it is receiving no telemetry. When I visit the thingpark.io/iot-flow console I can see an event
Strips AS023-JP fails on first join, succeeds on next tries
Hi, I am running the new Sensative Strips Presence AS923 JP region with LoRaWAN version 1.0.4 on Actility with a Kerlink iFemtoCell-evolution-923. When the device is added to the LNS and sends a join request, it always fails on the first try. The second
Actility Server installation on-premises
I would like to know if we can install actility server in my office setup locally. Thanks
What URL for creating new connection should I use?
Hello, I am a bit confused about the URL required while creating a new connection. In the tutorial this https://abeeway-dev1.thingpark.com:50540 is being used as the sensor is an abeeway one. What URL should I use for a generic device? Isn't there a
Building optimized working conditions and space management strategy through IoT
Dear community members, We have worked with WMW and Sensative and built a solution to support office managers, building operators, and workspace entrepreneurs to make their workspace even more mobile and dynamic. We will show how to improve space utilization
Milesight GW / Solution Bundles
Hello Community, FYI we are adding Milesight GW into ThingPark portfolio and will build up industrial solution bundles with their products very soon. All will be available under the community program. Thanks! Shmuel
Converting an Enterprise Saas Pre-Configured Gateway into a Community Gateway
Hi, We have a GEMTEK MICRO 8CH V1.5 3G/4G OUTDOOR GATEWAY which is pre-configured for Enterprise Saas (EU). We want to change the configuration for community server. How can we do this? Can anyone advise the proper way? Thanks in advance,
Video Series for the Community
Dear Community Members, I would like to propose this idea of creating a series of tutorial in the community web page animated by our community members or from Actility's teams. It will be great to have a tutorial video or inspiring insights about the
Advantech wise-6610 base station
I'm trying to connect the Advantech wise-6610 with the actility community platform. But when I try to download the Advantech wise-6610 Base station it states that the resource is currently unavailable. When will this be available?
send location after shock detection
I'm using the smart badge and I'm wondering if it can be configured to send it's location after a shock has been detected?
Using the Thingpark Community API
Hello, I have an account with https://community.thingpark.io/tpe/ I am trying to access the API for some python scripts. With the swagger ui, I am getting the following error. { "code": 400, "message": "Bad request: Invalid client id or secret", "errorId":
Minihub not connecting to ThingPark
Hi, we have bought from you a Gemtek/Browan Minihub gateway https://market.thingpark.com/gemtek-minihub-v1-5-wifi-indoor-lorawan-gateway.html Following your indications, it has been connected to a wifi network https://docs.thingpark.com/thingpark-enterprise/7.1/Content/BS-installation-guides/Configure-WiFi-connectivity.htm
Base Station connection error
Hi, our base station Kerlink Wirnet iStation 868 suddenly stopped sending data to Actility platform from friday 29/04/2022 night. The following actions have been performed: -switch off/on the device - no changes -device reset (kerosd -s and reboot), upgrade
User is not logged in
Hello, We are facing a problem with the use of the API. After a while of using the API we get an error message 'User is not logged in'. Before, when we had this problem we would refresh the connection but now it doesn't work anymore. Can you tell us what
Basics Station connection problem
Hi, my Basiscs Station GW (Rasp3 + IC880A) had been working without any issue. But suddenly connection with TPE server had been interrupted and could not connect again. 2022-03-09 22:12:53.975 [CUP:VERB] Retrieving update-info from CUPS https://community.thingpark.io:443...
How do connect other gateways to ThingParkEnterprise?
I'm trying to connect to ThingParkEnterprise using the Dragino LPS8 gateway, I can't find any URIs for base station connections, I think Dragino LPS8 gateway can't connect to it? Can you help me?
Payload generator
Hi, I would like to send a Downlink command via TTN to my Abeeway micro tracker V3, I have read the manual but I cannot understand how to create the code to be sent for the device setting. is there any payload generator available? Many thanks in adv
MQTT Broker
Hello, Our MQTT broker no more transmitted the downlinks whereas we are well subscribed to this topic. Do you have an explanation ? THanks in advance,
Remove Thingpark LRR from a Tektelic Gateway - Revert basestation to factory configuration
We have a Tektelic Kona Micro gateway https://tektelic.com/catalog/kona-micro-lorawan-gateway. I was able to install Thingpark LRR package on it following this instruction https://docs.thingpark.com/thingpark-wireless/7.1/Content/BS-installation-guides/Tektelic-base-stations.htm.
Packet Loss on SF7 in the Public Network on ST32L Based ST50H Module
Hi , Greetings, I am using STM32WL based ST50H module .It is running on Lorawan Stack 1.0.3. I am facing packet loss issue on this module ,particularly when ADR shifts to SF7.I have tried high gain antenna also, but no luck. The Network shows normal Network
Gateway Kerlink iFemtocell not connect to ip 10.152.12.10 /10.152.22.10
The gateway does not connect to ip 10.152.12.10/10.152.22.10. if you set ip "lrc-dev.thingpark.com" in the Backhaul settings, the gateway connects, but the parameters from the server are not set (frequencies, turning on the radio module) https://doc
Dragino LG02 + Abeeway micro tracker V3 + AWS
Hi, I have Dragino LP02 and Abeeway micro tracker V3, i'd like to send the data to AWS. Someone can help me? Best regards
TTGO T-Beam connecrt to Ufispace
Can I use TTGO (NodeMCU Device) connect to Ufispace (Gateway)? I try to use TTGO (NodeMCU) connect to Ufispace(Gateway). Has anyone use to connect to Ufispace, Do you have code to share?
ADR in community
Hi, I have a question about the calculation of ADR. I observed that with good radio conditions the SF changes at the 6th uplink. My device is powered at night so does not talk during the day. When the device restarts the device keeps the LoraWan session
Mac Hex Decoder
Hello, We would like to be able to decode the Max Hex Message through our Mqtt broker. Where can I find the documentation to do it ? Thanks in advance,
Is it possible to configure an alert for silent devices ?
Hi, I would like to know if in community it's possible to configure an alert for devices without uplinks from hours or days ? Thanks in advance,
Difference between thingpark wireless portal and thingpark community edition
Hi, What is the difference between thingpark wirless portal and the latest thingpark community editions? Earlier thingpark wireless doesn't support authorization header while Configuring the routing profiles now we could see there is custom header option.
Cisco IXM stuck after reboot
Hi! I have a Cisco IXM gateway. I tried to install your LRR but after reboot, my gateway seems stuck and I can't do anything with it anymore. It shows the prompt "Marvell>>" when I console into it. How can this be fixed?
Sending downlink to the device
Hi, I'm able to send an uplink from the loradevice to the connection that is created on the actility platform. I would like to send a downlink to the device. Is this the right API to use to send downlinks ? "https://dx-api.thingpark.com/core/v145/api/devices/<deviceID>/downlinkMessages"
Cannot delete Gateway
Since last update i am trying to delete a Gateway and that's not possible. I get this Error An unexpected error occurred while trying to handle your request. Please retry the request and contact your administrator if this problem persists. Error details:
packet-forwarder firmware validation failed on Cisco IXM
I've installed pubkey but cannot install packet forwarder I get error packet-forwarder firmware validation failed
Abeeway LoRaWAN tracker leaving a network and then coming back... what Join behavior to expect?
What happens when an Abeeway tracker gets out-of-range of a LoRaWAN network for a long time (or the network fails for an extended time) ? How does the tracker find-out that it has become isolated, and how does it attempt to reconnect ?
Why do I see sometimes very late packets in Wireless Logger ?
Sometimes uplink packets from devices appear in wireless logger with timestamps that are way in the past, few hours or even days. How to explain this behavior ?
ThingPark compatible gateways
Where can I find ThingPark compatible gateways?
Application server with MQTT(TLS1.2) support
My application server communicates with Actility sever. My application uses MQTT(TLS1.2) protocol. Can Actility server support MQTT(TLS1.2) protocol? And How Can My application connect and communicate with Actility server?