GW Milesight UG67 - No image available to install
Hello, I am trying to download the image for the GW Milesight UG67 but is not possible to select in the list. Please let me know if there is a link where is possible to download the image and the steps to install. Thanks.
Detail about Vietnam 8 channel imported region.
1. Which channel (frequencies) included in this region? 2. Which ISM band that "Vietnam 8 channel imported region" based on AS923 or AU915? 3. Which channel (frequencies) that nodes will use to join to Actility
Access to Actility FUOTA documentation
Hi, We would like to access documentation for FUOTA which can be found at the following link: https://docs.thingpark.com/thingpark-fuota/1.4/Overview/ It keeps asking for an Azure login. How can we get those documents? Best regards.
RAK WisGate Edge Pro RAK7289CV2
Can you give me the basic configuration parameters for this Gateway on Actility? LRR-UUID, where to find it? Also the parameters on the Gateway side, please.
Failed to retry TCURI from CUPS and Router rejected or retry limit reached
Hello, We pursued the official documentation [Implementation Steps - Easy LoRa Basics™ Station setup for Actility TPCP - ThingPark Community] to register the SX1307 IOT Starter Kit on Actility Console. However, after following all steps as per the documentation,
ThingPark Wireless and Node-Red
Hi everyone, I have just started working on a project using EM500 sensors connecting to Spark-IoT. I have the devices connecting, no worries at all. But I am struggling to figure out setting up the endpoint to get the data from ThingPark Wireless to
TNIT100915 on Thinkpark
I have a few TNIT100915 trackers and would like to know if they can be enabled on the ThinkPark Enterpise? Has anyone had any experience with them?
Gateway Kerlink - SSH - SUPLOG - Support Acoount Pass?
Hello, I have installed the image in my Kerlink Wirnet ifemtocell and it is Ok, verifying. Now I have to use the SUPLOG to obtain the LRR-UUID but following the instructions is necessary to connect with Support account by ssh and I don't know the password.
SSH login details - Regarding
Hello Everyone. Gateway: Ufispace Gateway Picocell V1.5 (THINGPARK READY) https://market.thingpark.com/ufispace-enteprise-pico-cell.html I would like to know the login user id and password for root/admin SSH access. Also how to get the LRR UUID and
smart badge pairing
I am desperately trying to pair a smart badge via the ios apli on iphone. When starting the device, it blocks at 25%. And indicates a 500 error code. Can you help me please. I already uninstall and reinstall the app on my iphone and it doesn't change
Gemtek/Browan WAPS-232N IOT Access Point
I have an IOT Access Point with opdk-3.00.27. I want to enable it on the ThingPark Enterprise of Actility, since I have already some sensors and one gateway there. I cannot establish a working connection with the gateway. Any ideas?
unable to Connect Kerlink Istation Gateway to thingpark community throught (cellular network)
i have a kerlink istation gateway which is already integrated to the Thingpark community throught the ethernet interface but when i try to connect using SIM card (cellular network) its not working although all required parameters are there .
Product not appearing in drop-list
Hi team, I'm the customer support representative of Sensoterra. My client wants to use Spark LoRaWAN network to connect our end-device (Soil Moisture Sensors), but our sensors do not appear on the product range in your pre-populated drop-down lists of
Enabling Uplink Forwarding to URL endpoint
I have some IoT devices that are registered on ThingPark platform. They send uplinks over LoRaWAN network. I need to forward those uplinks/payloads to a URL endpoint. How do I do that? How do I create a new server application? Is that even related? Thank
Azure IoT Bug notice (11/2022) : Please read if you are suddenly unable to connect to Microsoft Azure IoT Hub.
Overview Symptom: Your connection to IoT Hub is « CLOSED » and a restart doesn’t change anything There is a rolling upgrade of Azure IoT Hub services from 'v1' to 'v2', unfortunately it introduces a regression during authentication for which there is
Device data cant be processed and unexpected Downlinks for SF
Hi, one of my device (EA79E055D0365B08) is sending data via GWs( 1000098E and 1000063C) with good reception (RSSI : -77 & -81 respectively) at SF7. But recently (I guess last 3 weeks) I got following email: Device EA79E055D0365B08: Node uses higher data
What is the client_id for an on-prem deployed TPE
Hi All, I' trying to generate the bearer token so that I can use the DX API on a TPE deployed on a local server. What is the client_id for such a deployment?
HTTP connection downlinks not sent
Hello Thingpark team, We are experimenting TP Entreprise with a few devices and gateways. Uplinks are transferred to our application server via a TP X IoT HTTP connection. We also use the url provided with the connection to send downlinks. It worked well
How to get Iot-Flow tag.
As title say: I have set some tags at Iot-Flow and on some devices. I can get the tags for each device by using DX swagger but I can't find any where how I retrieve a certain IoT-flow tags. Any tips?
New Indoor Air Quality Solution
Hello Community, FYI we will be launching soon an Indoor Air Quality solution with Zenner (device maker) and Datacake (Application Provider). All details soon available on the community program solution catalog https://community.thingpark.org/iot-solutions-catalog/
Connection error to Actility Thingpark Community via Basic Station
Hi, I have a Tektelic Kona Micro GW that I am trying to Actility Thingpark Community via Basic Station installed on the GW. It was working properly but now I see the following error: Aug 18 00:04:10 kona-micro tek_bstn[20379]: [DEBUG ] bridge_bstn_cups.c:1012
ThingPark Community Connection to IBM Watson IoT connection issue
Hi there, I wish to send data which is collected by sensors via TPC to IBM Watson IoT. I followed the instructions at public documentation (https://docs.thingpark.com/thingpark-x/latest/Connector/IBMWATSON/) . Paramaters that matched show at drawing
Strips AS923 not working properly
Hi I am testing the new Sensative Strips 1.0.4 SW (AS923 JP) using Actility with a Kerlink gateway (ifemtocell evolution) and running into problems. The symptoms are: difficult to join, several attempts are needed before success, also when sending confirmed
Which gateways are supported on the Community portal?
Hi, where can I find the list of supported gateways for https://community.thingpark.org/ ?
LRR-UUID for Laird Sentrius RG1xx gateway.
Hello, I am new to the Actility network and I am trying to create a test application. I can't seem to find the LRR-UUID for my Laird gateway however. The only thing I have and have used on different platforms is the Gateway EUI. Has anyone else used
P-NUCLEO-LRWAN3 firmware
I use P-NUCLEO-LRWAN3. It includes NUCLEO-F746ZG and LRWAN_GS . I couldn't find firmware of it. How can i reach firmware and C codes ??
connection to azure IOT is 'stuck'
I have an Azure IOT connection that has been working for a few months without change. This morning at 3am (10 hours ago) it stopped. Azure is telling me that it is receiving no telemetry. When I visit the thingpark.io/iot-flow console I can see an event
Strips AS023-JP fails on first join, succeeds on next tries
Hi, I am running the new Sensative Strips Presence AS923 JP region with LoRaWAN version 1.0.4 on Actility with a Kerlink iFemtoCell-evolution-923. When the device is added to the LNS and sends a join request, it always fails on the first try. The second
Actility Server installation on-premises
I would like to know if we can install actility server in my office setup locally. Thanks
What URL for creating new connection should I use?
Hello, I am a bit confused about the URL required while creating a new connection. In the tutorial this https://abeeway-dev1.thingpark.com:50540 is being used as the sensor is an abeeway one. What URL should I use for a generic device? Isn't there a
Building optimized working conditions and space management strategy through IoT
Dear community members, We have worked with WMW and Sensative and built a solution to support office managers, building operators, and workspace entrepreneurs to make their workspace even more mobile and dynamic. We will show how to improve space utilization
Milesight GW / Solution Bundles
Hello Community, FYI we are adding Milesight GW into ThingPark portfolio and will build up industrial solution bundles with their products very soon. All will be available under the community program. Thanks! Shmuel
Converting an Enterprise Saas Pre-Configured Gateway into a Community Gateway
Hi, We have a GEMTEK MICRO 8CH V1.5 3G/4G OUTDOOR GATEWAY which is pre-configured for Enterprise Saas (EU). We want to change the configuration for community server. How can we do this? Can anyone advise the proper way? Thanks in advance,
Video Series for the Community
Dear Community Members, I would like to propose this idea of creating a series of tutorial in the community web page animated by our community members or from Actility's teams. It will be great to have a tutorial video or inspiring insights about the
Advantech wise-6610 base station
I'm trying to connect the Advantech wise-6610 with the actility community platform. But when I try to download the Advantech wise-6610 Base station it states that the resource is currently unavailable. When will this be available?
send location after shock detection
I'm using the smart badge and I'm wondering if it can be configured to send it's location after a shock has been detected?
Using the Thingpark Community API
Hello, I have an account with https://community.thingpark.io/tpe/ I am trying to access the API for some python scripts. With the swagger ui, I am getting the following error. { "code": 400, "message": "Bad request: Invalid client id or secret", "errorId":
Minihub not connecting to ThingPark
Hi, we have bought from you a Gemtek/Browan Minihub gateway https://market.thingpark.com/gemtek-minihub-v1-5-wifi-indoor-lorawan-gateway.html Following your indications, it has been connected to a wifi network https://docs.thingpark.com/thingpark-enterprise/7.1/Content/BS-installation-guides/Configure-WiFi-connectivity.htm
Base Station connection error
Hi, our base station Kerlink Wirnet iStation 868 suddenly stopped sending data to Actility platform from friday 29/04/2022 night. The following actions have been performed: -switch off/on the device - no changes -device reset (kerosd -s and reboot), upgrade
User is not logged in
Hello, We are facing a problem with the use of the API. After a while of using the API we get an error message 'User is not logged in'. Before, when we had this problem we would refresh the connection but now it doesn't work anymore. Can you tell us what
Next Page